The new ride

 So, after a lengthy hiatus, the Admiral and I are in a new ride.  She's a 2005 Cruisers Yachts 500 Express, powered by Volvo D12 diesels rated at 715 hp each, and coupled to ZF 325-IV V-drive transmissions.

Those of you who followed my previous blog:

searay340restoration.blogspot.com

are familiar with the format, but for the new people who may start to follow along, I'll try to post pictures and a description of each task that is completed, with a basic description of the engineering involved, and the goals to be met, with each post.

So, stay tuned - there's lots more to come!

This is a pic taken by the Admiral on the first day of our return trip from South Carolina to NY, where all the work will take place.




Comments

  1. 340 ExpresserAugust 31, 2021 at 4:49 PM

    Great to see your new project, and can’t wait to see what you do with it. I’ve been rebuilding a 1988 Sea Ray 340 Express, but don’t have a local work space. I really appreciated your work and explanations on the Sundancer, and will be re-engaging soon!

    ReplyDelete

Post a Comment

Popular posts from this blog

Image
 OK, I admit I haven't been posting as I should.  Life has a way of keeping me so busy that maintaining this blog has slipped a bit.  I'm going to try and fix that now though.  We've done a tremendous amount of work on the new boat, so I'll try and catch things up. May 2021 - First, a bit of history.  We purchased the boat in SC back in the spring of 2021.  Before bringing it home, I wanted to perform some of the overdue maintenance, just so I'd have some peace of mind during the ride home to the Hudson River.  Since the boat was located so far from home, I contracted with Specialized Mechanical Services in Wilmington, NC for the work to be done. In order for them to have access to the boat, my wife and I had to move her from the Myrtle Beach Yacht Club, SC, to the Port City Marina in NC.  This is a 4 or 5 hour cruise, and it was nice to get the new boat out for a ride after closing on her.  We had no issues on the maiden voyage, and left her securely slipped in Po
Read more

Props!

Image
  July 2021:  Props When we were running the boat home from South Carolina, there was a load imbalance between the two engines. The port engine was doing more work - running at higher boost, and consuming a bit more fuel.  The previous owner didn't have a problem with that, but things like this just drive me crazy.  Over time, the port fuel tank would run down faster than the starboard tank, and this discrepancy was exacerbated if the generator was running, since it also happens to draw from the port tank on this boat. Once I had the props scanned by my local Propscan shop, the reasons became obvious.  Fist, the starboard prop had one blade a bit of of whack.  Second, the starboard prop overall was carrying about 1/2" less pitch than the port side.  The props on this boat are specified as 28" x 42.5", indicating a 28" diameter and a 42.5" pitch.  Scan results showed that the port prop was close to 43" in pitch (average value), while the starboard prop
Read more